PTZ Aviation Model Camera Installation FPV Camera Mount + 2 Servos
€6,69
Skip to product information
PTZ Aviation Model Camera Installation FPV Camera Mount + 2 Servos
€6,69
PTZ Aviation Model Camera Installation FPV Camera Support + 2 Servo
- Brand: Tower Pro
- Product type: Servo
- Material: PVC
- Suitable for scale: 1:36
- Features: Digital servo, metal gears
- Weight: 9g
- Country of origin: China
Overview: Brand new and high quality
Product size: 30.9 x 31.8 x 12.5 mm
Product torque: 1.6 kg/cm (4.8 V)
Operating voltage: 4.8 V
Operating temperature: 0-55 degrees
Dead band width: 10us
Gear material: Nylon
Operating mode: Analog
Using an ordinary micro motor, the voltage is only second to the 9g standard version of the servo, it is currently a super good value for money servo!
Due to the lower voltage, the manufacturer recommends only the ordinary small electric aircraft model, not recommended for use with larger fixed-wing and electric helicopters!
Note: The images show the full installation effect. The steering gear and camera must be purchased separately. This pan-tilt can only be assembled with a steering gear and camera.
The steering gear rocker arm must be cut slightly before installation, and when installing the steering gear on the base, the rocker arm must also be modified (remove the edge of the round hole and then insert the rocker arm or trim the steering gear arm)!
Currently, this type of PTZ can only be installed with 28 x 28 camera modules, not 32 or 38 cameras. (Please note that the rudder arm of the steering gear must be trimmed.)
The 2-axis plastic pan-tilt weighs 17 grams and is suitable for 9–12 g steering gears. It has a nice appearance, precise manufacturing, no virtual position, and no shaking. It features a wire winding clamp for the steering gear.
The product is shown in the figure, 4 nylon plastic parts, including screws. Self-assembly is required.
Note:
1. The actual color of the item may vary slightly from the images shown on the website due to many factors such as the brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data. Thank you for your understanding.
3. 1 cm = 0.39''.
Package included:
1 set of PTZ parts or PTZ with 2 servos
Operating voltage: 4.8 V
Operating temperature: 0-55 degrees
Dead band width: 10us
Gear material: Nylon
Operating mode: Analog
Using an ordinary micro motor, the voltage is only second to the 9g standard version of the servo, it is currently a super good value for money servo!
Due to the lower voltage, the manufacturer recommends only the ordinary small electric aircraft model, not recommended for use with larger fixed-wing and electric helicopters!
Note: The images show the full installation effect. The steering gear and camera must be purchased separately. This pan-tilt can only be assembled with a steering gear and camera.
The steering gear rocker arm must be cut slightly before installation, and when installing the steering gear on the base, the rocker arm must also be modified (remove the edge of the round hole and then insert the rocker arm or trim the steering gear arm)!
Currently, this type of PTZ can only be installed with 28 x 28 camera modules, not 32 or 38 cameras. (Please note that the rudder arm of the steering gear must be trimmed.)
The 2-axis plastic pan-tilt weighs 17 grams and is suitable for 9–12 g steering gears. It has a nice appearance, precise manufacturing, no virtual position, and no shaking. It features a wire winding clamp for the steering gear.
The product is shown in the figure, 4 nylon plastic parts, including screws. Self-assembly is required.
Note:
1. The actual color of the item may vary slightly from the images shown on the website due to many factors such as the brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data. Thank you for your understanding.
3. 1 cm = 0.39''.
Package included:
1 set of PTZ parts or PTZ with 2 servos
